MILITARY PITOT-STATIC TESTER MODEL 6300-M3

Military RVSM pitot-static tester for all environments

Target Aircraft: All commercial; Military Aircraft (all environments)
Target Application: Pitot-static system checks
NSN: 4920 01 569 1292

Description: The Model 6300-M3 is designed to test military aircraft. It is used to perform leak checks and RVSM accuracy checks on the Pitot-Static systems – including altimeters, airspeed/Mach indicators, VSI’s, air data computers, autopilots – and can be done at low airspeeds. The 6300-M3 can be tested from the cockpit and has a wide operating temperature. The tester includes built-in vacuum and pressure pumps and emergency manual bleed-down valves. It can use “profiles” to run through an entire test range using a single key.

STATIC PORT

Pressure Function

Range:
1 to 42 inHg
Resolution:
0.001 inHg
Accuracy:
±0.002 inHg
Units:
inHg mbar

Pressure Rate

Range:
0 to 30 inHg/min
Resolution:
0.001 inHg/min
Accuracy:
±1% of rate
Units:
pressure-units/min

Altitude Function

Range:
-4000 ft to 100,000 ft
Resolution:
1 ft
Accuracy:
  • ± 2 ft @ 0 ft
  • ± 6 ft @ 35,000 ft
  • ± 12 ft @ 50,000 ft
  • ± 50 ft @ 80,000 ft
Units:
feet, meters

Climb Function

Range:
0 ft/min to ±50,000 ft/min
Resolution:
1 ft/min
Accuracy:
±1% of rate of climb
Units:
ft/min, meters/sec

SYSTEM

Power Requirement

90-260 VAC, 47-440 Hz, 300 VA
Or 28 VDC, 300W

External Interfaces

RS232 Serial, IEEE-488, Encoder

Dimensions & weights

Main unit:
22” x 14” x 9” / 44 lbs
Remote unit:
7” x 8” x 2” / 1 lb

Environmental Specs

Operating temp:
–40°C to 55°C
Storage temp:
–55°C to 85°C
Humidity:
5 to 100%

PITOT PORT

Pressure Function

Range:
0.1 to 110 inHg
Resolution:
0.001 inHg
Accuracy:
±0.003 inHg
Pt Units:
inHg, mbar, EPR
Qc Units:
inHg, mbar

Pressure Rate

Range:
0 to 30 inHg/min
Resolution:
0.001 inHg/min
Accuracy:
±1% of rate
Units:
pressure-units/min (EPR in inHg/min)

Airspeed Function

Range:
0 to 1100 knots
Resolution:
0.1 knots
Accuracy:
  • ± 1.5 knots @ 20 knots
  • ± 0.5 knots @ 50 knots
  • < 0.25 knots above 100 knots
  • < 0.1 knots above 300 knots
Units:
knots, Mach, km/hr, mph

Airspeed Rate

Range:
0 to 800 knots/min
Resolution:
0.1 knots/min (0.01 km/hr/sec)
Accuracy:
±2% of rate
Units:
knots/min, km/hr/min, mph/min

Mach Function

Range:
0.0 to 5.0 Mach
Resolution:
0.001 Mach
Accuracy:
±0.001 above 0.2 Mach

SYSTEM

Power Requirement

90-260 VAC, 47-440 Hz, 300 VA
Or 28 VDC, 300W

External Interfaces

RS232 Serial, IEEE-488, Encoder

Dimensions & weights

Main unit:
22” x 14” x 9” / 44 lbs
Remote unit:
7” x 8” x 2” / 1 lb

Environmental Specs

Operating temp:
–40°C to 55°C
Storage temp:
–55°C to 85°C
Humidity:
5 to 100%

RVSM compliant

The high accuracy of the tester and NIST-traceable calibration make the tester fully RVSM-compliant and suitable for use on all RVSM-compliant aircraft.

Calibration period

1 year

Automated operation

Simply enter the target set-points for altitude and airspeed and the unit automatically achieves the targets, ramping at the programmed rates. Control at the set-point is stable within ± 1 foot and ± 0.1 knot.

Programmable limits

User-programmable limits for altitude, airspeed, Mach and VSI provide protection to the aircraft.

“Jog” and “Hold” features

Set-points can be “jogged” up or down in small increments. Ramping to a set-point can be put on “hold” and controlled at the current measured value.

“Ground” feature

Brings Pitot and Static outputs to ambient “ground” pressure after completing a test.

“Profiles” feature

A profile of set-points can be downloaded from a PC, allowing the user to step through the set-points using a single key. Each profile can have up to 50 set-points and 20 profiles can be stored in the unit.

Leak checks

Pitot and Static leak-checks can be performed either independently or simultaneously. Three leak-timers can be programmed to perform timed leaks between 1 to 20 minutes. The display of “instant” leak rates provides immediate feedback to the user.

Pressure & Vacuum source

Built-in high-capacity dual vacuum pumps and pressure pump provide the pressure and vacuum source for the unit. The pressure system includes a filter and membrane dryer to provide clean dry air for the entire system.

Remote unit

The Remote unit is the operator interface for the tester. It is small and light enough to be used in the cockpit. The tester can be turned On and Off from the Remote. All valid parameters, including altitude, climb and airspeed, are clearly displayed simultaneously on a single screen on the remote.

Manual Vent

The tester includes precision metering valves to enable manual venting of the aircraft’s pitot static system, in the event of power-loss

APPLICATIONS

Leak-checks and Air-data-system accuracy-checks on all military and commercial fixed-wing aircraft, helicopters and UAV’s.
Leak-checks and Air-data-system accuracy-checks on all RVSM aircraft and military fighter/attack aircraft.
Ideally suited for military applications.

System
System Part Number Description
131-0180 Model 6300-M3 Automated Pitot-Static Tester. RVSM compliant.
Accessories
Accessories Part Number Description
129-1228 Power cable – North America (8 ft)
129-1328 Power cable – UK (8 ft)
129-1268 Power cable – Europe (8 ft)
129-1311 Power cable – Switzerland (8 ft)
129-1260 Power cable – India (8 ft)
129-1425 Power cable – China (8 ft)
129-1440 Power cable – Australia (8 ft)
118-2465 Shipping Case for all ADTS with Hosekits, Legacy/Military ADTS, all Calibrators
115-0886A Hose-kit-2 for Legacy 2-channel models
131-0264 Universal Pitot-Static Adapter kit for GA aircraft
131-0248 MOB-48: Multi-output box for 2-channels testers – 4 pitot & 8 static
131-0272 MOB-44: Multi-output box for 2-channels testers – 4 pitot & 4 static
131-0236 MOB-36: Multi-output box for 2-channels testers – 3 pitot & 6 static
Test Set Type

Air Data Ramp

Aircraft Type

Military

RVSM Capable

Yes

Max Aircraft Altitude

50,000 ft, 60,000 ft, 100,000 ft

Max Aircraft Airspeed

500 knots, 600 knots, 650 knots, 690 knots, 1100 knots

Number of Channels

2

Target Application

Military Aircraft

Range

-4,000 to 100,000 ft.

Resolution

1 foot

Accuracy

2 ft @ 0 ft 6 ft @ 35,000 ft 12 ft @ 50,000 ft 50 ft @ 80,000 ft

Rate

0 to 800 knots/min

Remote controller

Standard

Wi-Fi

N/A

RS-232 interface

Standard

IEEE-488 interface

Standard

Encoder input

Standard

28 VDC Power

Standard

Battery

N/A

Heaters

Included

Warranty

3 Years

Displayed Static Units

Feet, meters, inHg, mbar

Displayed Pitot Units

knots, Mach, kmph, mph, EPR, inHg, mbar, Qcin, Qcmb

Power Requirement

90-260 VAC, 47-400 Hz, 500 VA or 28 VDC, 150W (300W w/ Heaters)

Dimensions & Weights

22" x 14" x 9" / 44 lbs.

Calibration Interval

Annual

Operating Temp.

-40°C to 55°C

Optional Temp Ranges

Not Available

Humidity (non-condensing)

5 to 95%

Altitude capability (ft)

100,000 ft, 50,000 ft, 60,000 ft

Wide Temp capable

Yes

Battery/Wi-Fi capable

N/A

Capability

RVSM Capable, Wide Temp

Range socf

0 to 50,000 ft./min

Accuracy socf

1% of Rate

Resolution socf

1 ft./min

Range poaf

0 to 1100 knots

Rate poaf

0 to 800 knots/min

Resolution poaf

0.1 knot

Accuracy poaf

<0.1 knots above 300 knots, <0.25 knots above 100 knots, 0.5 knots @ 50 knots, 1.5 knots @ 20 knots

You may also like…

  • PITOT-STATIC TESTER MODEL 6300

    RVSM pitot-static tester for all aircraft types (2-channel)

    Target Aircraft: All commercial; approved for Boeing, Airbus, and most OEMs
    Target Application: RVSM pitot-static checks

    Description: The Model 6300 is a 2-channel system designed to test all aircraft up to 60,000 ft & 690 knots. It is used to perform leak checks and RVSM accuracy checks on the Pitot-Static systems – including altimeters, airspeed indicators and VSI’s – and can be done at low airspeeds. The Model 6300 includes a Remote unit with large keypad and display, a removable 8-hour battery (optional), wide operating temperature (optional), and “profiles” to accelerate testing. The unit can be controlled by an iPad or other tablets.

    Download the Application
    Read more
  • AVIONICS RADIO TEST SET ARTS-7000

    All-in-one Communication, Navigation, Surveillance avionics radio tester

    Target Aircraft: All types (GA to commercial airliners)
    Target Application: Navigation, Communications, Surveillance, GPS Systems Test

    Description: The Laversab ARTS-7000 is an all-in-one Avionics Radio Test System – ARTS. It has a modular architecture designed to meet any aircraft radio test requirement – communication, navigation, surveillance, and RF tools. Suitable for all aircraft types – from GA to commercial airliners to military – the ARTS-7000 is controlled wirelessly by a simple user interface. It can connect to Laversab pitot-static testers to fully exercise an aircraft. The ARTS-7000 has been engineered to reduce upfront costs, simplify aircraft testing, and cover all radio test requirements.

    Download the Application
    Read more
  • MILITARY PITOT-STATIC TESTER MODEL 6600-M4

    Military RVSM pitot-static tester for AoA / AoS / SmartProbe applications (3-channel)

    Target Aircraft: Military Aircraft with AoA / AoS capability
    Target Application: Pitot-static system checks

    Description: The Model 6600-M4 is a 3-channel system designed to test military aircraft with AoA / AoS / SmartProbe™️ capability. The tester has one Static output (Ps1), one Pitot output (Pt) and a third output (Ps2) which can be used to simulate either AOA or AOS. It is used to perform leak checks and RVSM accuracy checks on the Pitot-Static systems – including altimeters, airspeed/Mach indicators, VSI’s, air data computers, autopilots – and can be done at low airspeeds. The 6600-M4 can be tested from the cockpit. The tester includes built-in vacuum and pressure pumps and emergency manual bleed-down valves. It can use “profiles” to run through an entire test range using a single key.

    Read more