STATIC PORT
Pressure Function
Pressure Rate
Altitude Function
- ± 2 ft @ 0 ft
- ± 6 ft @ 35,000 ft
- ± 12 ft @ 50,000 ft
- ± 50 ft @ 80,000 ft
Climb Function
PITOT PORT
Pressure Function
Pressure Rate
Airspeed Function
- ± 1.5 knots @ 20 knots
- ± 0.5 knots @ 50 knots
- < 0.25 knots above 100 knots
- < 0.1 knots above 300 knots
Airspeed Rate
Mach Function
SYSTEM
Power Requirement
External Interfaces
Dimensions & weights
Environmental Specs
RVSM compliant
The high accuracy of the tester and NIST-traceable calibration make the tester fully RVSM-compliant and suitable for use on all RVSM-compliant aircraft.
Calibration period
1 year
Automated operation
Simply enter the target set-points for altitude and airspeed and the unit automatically achieves the targets, ramping at the programmed rates. Control at the set-point is stable within ± 1 foot and ± 0.1 knot.
Programmable limits
User-programmable limits for altitude, airspeed, Mach and VSI provide protection to the aircraft.
“Jog” and “Hold” features
Set-points can be “jogged” up or down in small increments. Ramping to a set-point can be put on “hold” and controlled at the current measured value.
“Ground” feature
Brings Pitot and Static outputs to ambient “ground” pressure after completing a test.
“Profiles” feature
A profile of set-points can be downloaded from a PC, allowing the user to step through the set-points using a single key. Each profile can have up to 50 set-points and 20 profiles can be stored in the unit.
Leak checks
Pitot and Static leak-checks can be performed either independently or simultaneously. Three leak-timers can be programmed to perform timed leaks between 1 to 20 minutes. The display of “instant” leak rates provides immediate feedback to the user.
Pressure & Vacuum source
Built-in high-capacity dual vacuum pumps and pressure pump provide the pressure and vacuum source for the unit. The pressure system includes a filter and membrane dryer to provide clean dry air for the entire system.
Remote unit
The Remote unit is the operator interface for the tester. It is small and light enough to be used in the cockpit. The tester can be turned On and Off from the Remote. All valid parameters, including altitude, climb and airspeed, are clearly displayed simultaneously on a single screen on the remote.
Manual Vent
The tester includes precision metering valves to enable manual venting of the aircraft’s pitot static system, in the event of power-loss
APPLICATIONS
Leak-checks and Air-data-system accuracy-checks on all military and commercial fixed-wing aircraft, helicopters and UAV’s.
Leak-checks and Air-data-system accuracy-checks on all RVSM aircraft and military fighter/ attack aircraft.
Ideally suited for military applications when wide operating temp. and 28 VDC operation are not required.
| System | ||
| System | Part Number | Description |
|---|---|---|
| 131-0343 | Model 6300-M4 Automated Pitot-Static Tester. RVSM Compliant. | |
| Accessories | ||
| Accessories | Part Number | Description |
|---|---|---|
| 129-1228 | Power cable – North America (8 ft) | |
| 129-1328 | Power cable – UK (8 ft) | |
| 129-1268 | Power cable – Europe (8 ft) | |
| 129-1311 | Power cable – Switzerland (8 ft) | |
| 129-1260 | Power cable – India (8 ft) | |
| 129-1425 | Power cable – China (8 ft) | |
| 129-1440 | Power cable – Australia (8 ft) | |
| 118-2465 | Shipping Case for all ADTS with Hosekits, Legacy/Military ADTS, all Calibrators | |
| 115-0886A | Hose-kit-2 for Legacy 2-channel models | |
| 131-0264 | Universal Pitot-Static Adapter kit for GA aircraft | |
| 131-0248 | MOB-48: Multi-output box for 2-channels testers – 4 pitot & 8 static | |
| 131-0272 | MOB-44: Multi-output box for 2-channels testers – 4 pitot & 4 static | |
| 131-0236 | MOB-36: Multi-output box for 2-channels testers – 3 pitot & 6 static | |
